Color Removal Agent

Description:
This product is a quaternary ammonium cationic polymer.

Application Field:

1. Mainly used for waste water treatment for textile, printing, dyeing, paper-making, ink, ect.

2. Also can be used for color removal treatment for dyeing high-colority waste water.

3. It is suitable to treat waste water with activated, acidic and disperse dyestuffs.

Advantage:

1.Strong decolorization and COD remove

2.Faster sedimentation, better flocculation

3.Non-pollution(no aluminum, chlorine, heavy metal ions ect.)

Specificationa:
1, Appearance: Light-color, sticky liquid
2, Viscosity: 50 – 250mPa. S (20º C)
3, Solid content: >50%
4, pH 30% solution: 3 – 5
5, Specific gravity: 1.2 – 1.3 (25º C)

Note: our product can be made upon your special request.

Application Method:

1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After several minutes, it can be precipitated or air-floated to get clear water.

2. The pH of the waste water should be adjusted to 6-10 for better result.

3. When the colority and CODcr are relatively high, it can be used with the help of poly aluminum chloride, but not mixed together. In this way, the treatment cost can be lower. Whether polyaluminum chloride used earlier or later depends on the flocculation test and the treatment process.

Package and Storage:

1. It is harmless, non-flammable and non-explosive.

2. It is packed in plastic drums with each containing 30kg, 250kg and 1250kg IBC tank( or others according to your requirements).

3. It can not be placed in the sun, storage temperature: -5-30°C

4. This product will appear layer after a long-term storage, but the effect will not be affected with stir.